The Leprecon VX Dimmer is designed to meet the demanding requirements of the lighting industry. Emphasis was placed on designing a system that is flexible, reliable, and serviceable. The latest digital technology, combined with a modular design, bring a new level of performance and ease of use to portable and permanent dimming systems.

Features:

-Modular Dimming and Control Electronics

Dimmer and control electronics can be serviced from the front panel, without removing the dimmer from the rack or enclosure.

-DMX Control Input

Digital control electronics using a patented circuit allows simultaneous DMX-512 and analog control input, with a highest-takes-precedence logic. Parallel input and output for DMX-512 allows daisy-chaining racks together in one system. DMX start address switches allow the dimmers to be assigned to start receiving data at any of the 512 addresses. 

“True Digital” control electronics provides accurate dimmer output tracking from channel to channel, eliminating any variance in output levels when multiple dimmer channels are patched together.

-Analog Control Input

Two 8 pin Jones type male plugs are provided for 0-10 DC analog control. Control cable and pin connections are compatible with other Leprecon dimmers.

-Channel breakers 

The circuit breakers used in the VX dimmers are fast response magnetic breakers. the quality of the breaker contributes to the reliable operation of the dimmer pack, even when shorted lamps or cables are plugged into the dimmer. The front panel toggle also allows the breaker to be used as a switch for the dimmer channel. 

-Fan Cooling 

Two fans are used in the VX dimmer to keep the electronics at a safe operating temperature. The fans are controlled by a thermostat to keep fan noise to a minimum. When the pack is lightly loaded, the fans turn at a slower rate, and are accelerated to full speed when the temperature inside the pack increases. 

-Ten Scene Memory

Non-volatile memory in the VX control card retains 10 scenes for backup or use without controller. Scenes program via front panel controls, and may be set individually at any time.